Electronic Fuel Injection Fuel Pump

No Welding Required - Components Bolt Together.
You assemble to the depth of your tank and install.

Components:
Stainless Steel Reservoir Tray
Supply Line
Return Line
Vent Opening
In-Tank Wiring Harness
Threaded In-Tank Mounting Ring (plated steel)
Heavy Gauge Mounting Plate
Adjustable Support Arm (plated steel)
Walbro Fuel Pump

The PA-2 Pump Kit has sufficient pressure and flow rate to handle the following popular fuel injected engines used in today's street rods:
1985-1992 Camaro and Firebird
1985-1987 Corvette 5.7L 350 CID TPI
1987-1997 Mustang 5.0L 302 CID
1991-1993 Thunderbird 281 CID
(This is not a complete listing - check your factory motor specs)

The PA-2 Pump Kit meets or exceeds factory specs for the following installations:
GM Performance Parts Fuel Injection Unit
1988-1996 Corvette 5.7L 350 CID
1993-1999 Camaro and Firebird (Meets operating specs)
(This is not a complete listing - check your factory motor specs)

If your engine is not listed, simply determine the gallons per hour (flow rate) and the operating pressure required, and match it to the listings above.

NOTE: Tanks, Inc. kits do not include pressure regulators.

Pump Flow Rates:
Deluxe 190 Liter Per Hour Pump
54 GPH @ 40 PSI
50 GPH @ 50 PSI
48 GPH @ 60 PSI

All Flow Rates Are At 13.5 Volts