Tanks, Inc. PA-4 High-Flow In-Tank EFI Retrofit Kit - 255 LPH
Description
Tanks, Inc. PA-4 High-Flow In-Tank EFI Fuel Pump Retrofit Kit
The Tanks, Inc. PA-4 is a high-flow, universal in-tank electronic fuel injection conversion kit designed to retrofit an electric fuel pump into many conventional automotive fuel tanks. Featuring a genuine 255 LPH Walbro fuel pump, adjustable mounting components, and an internal fuel reservoir tray, the PA-4 provides a fuel delivery solution for classic vehicles, high-performance street cars, custom trucks, and modern restomods.
Unlike GPA-Series pump modules, which are intended for compatible fuel tanks that already contain an internal reservoir, the PA-Series retrofit system includes a reservoir tray and the mounting components needed to adapt many existing fuel tanks for in-tank electric fuel pump operation.
Features & Specifications
- Manufacturer: Tanks, Inc.
- Part Number: PA-4
- Product Type: High-flow universal in-tank EFI fuel pump retrofit kit
- Fuel Pump: Genuine Walbro gerotor-style electric fuel pump
- Rated Flow: 255 liters per hour (approximately 67 GPH)
- Horsepower Guidance: Up to approximately 630 HP, depending on operating conditions
- Maximum Pump Pressure Rating: Up to 100 PSI
- Fuel Supply Connection: 1/4-inch NPT
- Fuel Return Connection: 1/4-inch NPT
- Tank Vent Connection: 1/4-inch NPT
- Mounting Components: Heavy-gauge yellow-zinc-plated steel
- Mounting Design: Threaded mounting ring, mounting plate, and adjustable support arm
- Reservoir: Internal fuel reservoir tray included
- Electrical: In-tank fuel pump wiring harness included
- Minimum Tank Depth: 6 inches
- Maximum Tank Depth: 11.5 inches without modification
- PWM Compatibility: Not compatible with pulse-width-modulated fuel pump control
Retrofit Kit Components
The PA-4 includes the primary components required to install an internal electric fuel pump into a suitable conventional fuel tank, including:
- 255 LPH Walbro electric fuel pump.
- Internal fuel reservoir tray.
- Heavy-gauge mounting plate.
- Threaded in-tank mounting ring.
- Adjustable-height support arm.
- Fuel supply, return, and vent connections.
- In-tank electrical wiring components.
Important: The kit does not include a fuel pressure regulator or fuel-level sending unit. Additional fuel plumbing, filtration, fittings, electrical components, and installation materials may be required depending on the application.
Fuel Tank Compatibility & Installation
The PA-4 is designed for retrofit installation into many conventional fuel tanks that were not originally equipped with an internal electric fuel pump or EFI reservoir.
Installation requires modifying the fuel tank to accommodate the pump module, mounting ring, and reservoir assembly. The selected tank must have sufficient depth, available mounting surface, and internal clearance for the components.
Tanks, Inc. specifies a minimum tank depth of 6 inches and a maximum depth of 11.5 inches without modification. Actual compatibility must be confirmed based on tank dimensions, internal baffling, pickup arrangements, and mounting clearance.
The internal reservoir tray helps maintain a consistent fuel supply during acceleration, braking, and cornering. This is particularly important when converting conventional fuel tanks that were not originally designed for electronic fuel injection.
The PA-4 is intended for compatible conventional tank installations. Tanks, Inc. also offers a PA-4P configuration for certain recessed polyethylene tanks. The correct module must be selected for the specific tank design. Some Tanks, Inc. polyethylene tank applications use the standard PA-Series configuration.
High-Performance EFI Applications
With a rated flow of 255 liters per hour, the PA-4 provides increased fuel delivery capacity compared with the 190 LPH PA-2 module.
Tanks, Inc. provides horsepower guidance of up to approximately 630 HP, but this figure is an application estimate rather than a guaranteed horsepower limit. Actual pump capacity depends on fuel pressure, operating voltage, fuel type, electrical supply, and system configuration.
Potential applications include:
- Classic muscle cars converted to electronic fuel injection.
- Performance-oriented LS engine conversions.
- Custom trucks and restomods retaining a conventional fuel tank.
- High-performance aftermarket EFI systems with compatible pump control.
- Hot rods and custom vehicles requiring an in-tank fuel pump retrofit.
- Fuel delivery upgrades where a higher-flow pump is required.
When selecting a pump, evaluate the manufacturer's fuel flow data at the engine's required operating pressure. A pump's nominal flow rating does not represent the fuel volume available at every pressure.
Important Fuel Pump Control Information
The PA-4 uses a gerotor-style Walbro fuel pump and is not compatible with pulse-width-modulated (PWM) fuel pump control.
Applications using an engine management system with PWM fuel pump control must be configured for an appropriate non-PWM control strategy or use a different fuel pump module specifically designed for PWM operation.
For example, Tanks, Inc. instructs installers using compatible FiTech EFI systems to disable PWM operation when using these gerotor-style pumps.
The PA-4 requires proper fuel pressure regulation, filtration, appropriately sized fuel lines, adequate electrical wiring, and correct fuel tank venting.
Tanks, Inc. offers an optional 1/4-inch NPT rollover vent valve (Part #VV) that can be installed into the module's vent connection as part of a properly designed tank venting system.
PA-2 vs. PA-4 vs. GPA-Series Fuel Pumps
PA-2: A 190 LPH retrofit kit with an internal reservoir tray for many conventional fuel tanks. Intended for applications with lower fuel flow requirements.
PA-4: A 255 LPH high-flow retrofit kit incorporating the reservoir tray and mounting components needed for compatible conventional tanks. Provides additional fuel flow capacity for higher-performance EFI applications.
GPA-Series: In-tank fuel pump modules designed for compatible Tanks, Inc. fuel tanks that already have an internal reservoir tray and the appropriate mounting provisions. Selected GPA-Series pumps also support PWM fuel pump control.
The correct pump should be selected based on both fuel tank compatibility and engine fuel delivery requirements.
Professional EFI Fuel System Installation
Squid's Rod Shop is an authorized Tanks, Inc. dealer providing fuel system components, custom fabrication, and professional installation in Hickory, North Carolina.
Our team specializes in electronic fuel injection conversions, custom fuel tank modifications, in-tank electric fuel pump installation, fuel line fabrication, electrical integration, and complete fuel delivery systems for modern engine swaps and custom vehicles.
Whether you're completing a high-performance LS conversion, upgrading a classic truck, or building a full restomod, we can help determine whether the PA-4 is appropriate for your engine and fuel tank combination.
For product compatibility assistance or professional installation, contact Squid's Rod Shop.
Pricing Note: All prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.
Details
- PA-4
- PA-4
- Tanks, Inc.
- Available to order. Manufacturer lead times may apply.
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
- Free ground shipping within the contiguous 48 United States.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!