RideTech 90006873 Firestone 224C Double-Convoluted Air Spring
Description
RideTech 90006873 Firestone 224C Double-Convoluted Air Spring
The RideTech 90006873 is a Firestone 6873 / 224C double-convoluted air spring designed for compatible RideTech CoolRide suspension systems, replacement applications, and custom air suspension installations.
Featuring a nominal 8-inch inflated diameter and a double-convoluted construction, this air spring provides adjustable suspension support through regulated air pressure. It is used in a variety of classic car, custom truck, hot rod, and street rod suspension applications.
The air spring can be used as a replacement component in compatible existing RideTech systems or incorporated into a custom installation with properly engineered mounting hardware, suspension geometry, and air management components.
Features & Specifications
- Brand: RideTech
- RideTech Part Number: 90006873
- Air Spring Manufacturer: Firestone
- Firestone Model: 6873 / 224C
- Product Type: Double-convoluted air spring
- Minimum Compressed Height: 3 inches
- Typical RideTech-Listed Ride Height: 5 to 5.5 inches
- RideTech-Listed Maximum Height: 8 inches
- Nominal Inflated Diameter: 8 inches
- Air Fitting Port: 1/4-inch NPT
- Construction: Reinforced rubber double-convoluted air spring with metal mounting plates
- Quantity: One air spring
- Mounting Brackets: Sold separately
- Air Management System: Not included
Engineering Note: Published load ratings and recommended operating heights vary among distributor references for this part number. Confirm the applicable Firestone/RideTech load-versus-pressure-and-height data before selecting this air spring for a new suspension design.
Double-Convoluted Air Spring Design
The Firestone 224C air spring uses a double-convoluted construction consisting of reinforced rubber bellows secured between upper and lower mounting plates.
The double-convoluted design provides suspension support through compressed air while allowing vehicle ride height and spring characteristics to change with operating pressure and suspension position.
Unlike a traditional steel coil spring, an air spring allows the suspension's supporting force to be adjusted through changes in air pressure.
Actual suspension performance depends on the air spring's installed height, vehicle weight, suspension geometry, shock absorber characteristics, and operating pressure.
Ride Height & Suspension Travel
RideTech commonly lists the 90006873 with a 3-inch minimum height, a typical 5 to 5.5-inch installed ride height, and an 8-inch maximum height.
These dimensions are useful for preliminary packaging, but final suspension design should be based on the current manufacturer's dimensional and load data for the exact air spring.
Important: Do not establish ride height, mechanical travel limits, or load capacity solely from a generic product listing. Confirm the application-specific operating dimensions before installation.
The suspension must provide appropriate clearance for the air spring throughout its operating travel, including compression, rebound, and articulation.
Load Capacity & Operating Pressure
The 224C double-convoluted air spring is used in suspension systems requiring substantial load support within a relatively compact installed height.
Air spring load capacity is affected by internal pressure, installed height, and the effective area of the spring. A published maximum capacity at one pressure does not necessarily represent the load supported at a different operating height or pressure.
For new installations, the required spring capacity should be calculated using vehicle corner weights and the suspension's motion ratio. Verify the manufacturer's current load-versus-height-and-pressure information before selecting the air spring.
The load rating of an individual air spring should not be confused with a vehicle's allowable axle load or gross vehicle weight rating.
Bump Stops & Suspension Protection
Firestone double-convoluted air springs do not inherently require external bump stops solely to protect the air spring from normal compression.
However, the specific vehicle installation may require compression stops to maintain safe ground clearance, prevent chassis contact, protect steering and driveline components, or avoid damage when air pressure is reduced.
Proper suspension design should also include an appropriate method of controlling rebound and maximum extension, typically through the shock absorber and associated suspension geometry.
Vehicle ride height, mechanical clearances, and suspension travel must be checked throughout the full operating range.
CoolRide & Custom Suspension Applications
RideTech uses the 90006873 air spring in selected CoolRide suspension systems for classic cars, custom trucks, and other vehicles.
Potential applications include:
- Replacement air springs for compatible RideTech CoolRide suspension systems.
- Classic Chevrolet and GM passenger car air suspension conversions.
- Custom Chevrolet C10 and other pickup truck suspension systems.
- Traditional hot rods and street rods.
- Custom chassis and suspension fabrication projects.
- Vehicles requiring a compact double-convoluted air spring with appropriate load support.
Compatibility Note: This is not a direct-fit installation kit for every vehicle. The correct upper and lower mounting brackets, suspension clearance, and load requirements must be established for the application.
When replacing an air spring in an existing system, verify the exact RideTech part number and mounting arrangement before ordering.
Installation & Air System Requirements
Proper installation requires compatible upper and lower mounting surfaces, suitable mounting hardware, and a correctly installed 1/4-inch NPT air fitting.
The air spring should remain properly aligned throughout suspension travel and must not contact sharp edges, exhaust components, tires, frame members, or other moving parts.
Air lines must be routed away from heat, abrasion, and moving suspension components. All pneumatic connections should be checked for leaks after installation.
An appropriately designed air management system is required to supply and regulate pressure. Depending on the project, this may include a compressor, reservoir, pressure switches, valves, air lines, and electrical controls.
This product is sold as one replacement air spring. Air management components, mounting brackets, shock absorbers, and installation accessories are not included unless separately specified.
Professional Air Suspension Installation
Squid's Rod Shop is an authorized RideTech dealer providing air suspension components, custom suspension fabrication, and professional installation in Hickory, North Carolina.
Our team specializes in custom chassis and suspension systems, air spring mounting, suspension geometry, compressor and air management installation, and complete restomod builds.
Whether you're replacing an existing RideTech air spring or designing a custom air suspension system, we can help determine the correct spring configuration, mounting arrangement, and operating requirements.
For product compatibility assistance or professional installation, contact Squid's Rod Shop.
Pricing Note: All prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.
Details
- 90006873
- 90006873
- RideTech
- Available to order. Manufacturer lead times may apply.
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
- Free ground shipping within the contiguous 48 United States.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!