Additional Images

RideTech 90007012 Firestone 7012 Rolling-Sleeve Rear Air Spring - 1000 lb

90007012
RideTech 90007012 Firestone 7012 rolling-sleeve rear air spring. 1,000 lb at 100 PSI, 5-inch diameter, 7–8-inch ride height and 1/8-inch NPT air port. Compression and extension stops required.
Availability: Available to order. Manufacturer lead times may apply.
Shipping: Free ground shipping within the contiguous 48 United States.
Pricing: $85.00
Qty:
Free Shipping!

Description

RideTech 90007012 Firestone 7012 Rolling-Sleeve Rear Air Spring - 1000 lb

The RideTech 90007012 is a Firestone 7012 rolling-sleeve air spring designed for compatible RideTech AirOverLeaf rear suspension systems, replacement applications, and custom air suspension installations.

With a published load capacity of 1,000 pounds at 100 PSI, a 5-inch inflated diameter, and a recommended installed height of 7 to 8 inches, this air spring provides adjustable suspension support for properly engineered rear suspension systems.

The rolling-sleeve configuration offers a longer operating stroke than many compact double-convoluted air springs, making it suitable for applications where suspension travel and packaging requirements favor this design.

Features & Specifications

  • Brand: RideTech
  • RideTech Part Number: 90007012
  • Air Spring Manufacturer: Firestone
  • Firestone Model: 7012 / F7012
  • Product Type: Rolling-sleeve air spring
  • Common Application: Rear AirOverLeaf suspension
  • Published Load Capacity: 1,000 pounds at 100 PSI
  • Minimum Compressed Height: 4 inches
  • Recommended Installed Height: 7 to 8 inches
  • Maximum Extended Height: 13 inches
  • Inflated Diameter: Approximately 5 inches
  • Air Fitting Port: 1/8-inch NPT
  • Construction: Reinforced rubber rolling-sleeve air spring
  • Quantity: One air spring
  • Air Line Fittings: Not included
  • Mounting Brackets: Not included
  • Air Management System: Not included

Rolling-Sleeve Air Spring Design

The Firestone 7012 uses a rolling-sleeve design in which the reinforced rubber sleeve rolls along the air spring piston as the suspension moves through its operating range.

This design provides adjustable load support through changes in internal air pressure while accommodating substantial suspension movement within the manufacturer's specified dimensional limits.

Unlike a conventional steel coil spring, an air spring allows its supporting force to be adjusted by changing air pressure.

Actual suspension performance depends on operating pressure, installed height, vehicle weight, suspension motion ratio, mounting geometry, and shock absorber characteristics.

Load Capacity & Operating Pressure

RideTech publishes a load capacity of 1,000 pounds at 100 PSI for the 90007012 air spring.

This rating applies to one air spring at the specified pressure. It does not represent a complete vehicle's axle capacity or establish the maximum allowable vehicle weight.

Actual suspension load support depends on operating height, air pressure, and the suspension's leverage ratio.

When designing a custom air suspension system, determine the vehicle's corner weights and suspension geometry before selecting the air spring.

The published 100 PSI load rating is a reference condition and should not be interpreted as the required operating pressure for every vehicle.

Ride Height & Suspension Travel

The RideTech 90007012 has the following published dimensional characteristics:

  • Minimum Compressed Height: 4 inches
  • Recommended Ride Height: 7 to 8 inches
  • Maximum Extended Height: 13 inches
  • Inflated Diameter: 5 inches

The recommended 7-to-8-inch installed height provides a starting point for applications requiring compression and rebound travel around the normal operating position.

Important: The published minimum and maximum heights are mechanical operating limits, not recommended continuous driving heights.

The suspension must be designed to prevent the air spring from operating outside its approved range.

Final suspension travel must also account for axle movement, shock absorber travel, driveline clearance, brake hose routing, and available chassis space.

Required Compression & Extension Stops

All rolling-sleeve air spring installations require both an external compression bump stop and an extension stop.

The compression bump stop must prevent the suspension from compressing the air spring below its minimum allowable height.

The extension stop must prevent the suspension from extending the air spring beyond its maximum allowable height. A properly selected shock absorber or limiting strap may serve as the extension stop.

RideTech warns that exceeding these dimensional limits can cause severe damage to the air spring and potentially damage the vehicle.

The air spring itself must not be used as a mechanical suspension travel stop.

Proper travel limits must be established during suspension installation and verified throughout the complete operating range.

AirOverLeaf Rear Suspension Applications

The 90007012 is commonly used in RideTech AirOverLeaf suspension systems.

AirOverLeaf configurations add pneumatic suspension support to compatible leaf-spring rear suspensions, allowing air pressure to influence vehicle support and ride height within the engineered limits of the complete system.

Potential applications include:

  • Replacement air springs for compatible RideTech AirOverLeaf systems.
  • Classic cars equipped with properly designed rear air suspension.
  • Street rods and hot rods with custom rear suspension systems.
  • Custom pickup trucks with compatible mounting arrangements.
  • Custom suspension projects requiring a 5-inch-diameter rolling-sleeve air spring.
  • Replacement installations using the same RideTech or Firestone air spring model.

Compatibility Note: This product is not a universal bolt-in air suspension conversion kit.

The correct mounting brackets, suspension load requirements, operating height, and travel limits must be verified before installation.

For an existing RideTech suspension system, confirm the original air spring part number and mounting configuration before ordering a replacement.

Air Fitting & Mounting Requirements

The Firestone 7012 uses a 1/8-inch NPT air fitting port.

Do not assume that fittings supplied for other RideTech air springs will fit this model. Several other RideTech air spring configurations use 1/4-inch NPT connections.

The appropriate 1/8-inch NPT air fitting must be selected to match the air line size and installation requirements.

Mounting hardware and bracket compatibility must also be confirmed. Published distributor information differs regarding the lower mounting bolt thread, so the correct mounting hardware should be verified against the actual air spring or current RideTech documentation.

Air lines must be protected from heat, abrasion, moving suspension components, and sharp edges.

All pneumatic connections should be leak-tested after installation.

Air Management System Requirements

Proper operation requires an appropriately designed air supply and control system.

Depending on the vehicle and installation, this may include:

  • Electric air compressor.
  • Air reservoir.
  • Manual or electronic control valves.
  • Air pressure monitoring.
  • Compatible air lines and fittings.
  • Electrical wiring and control components.

Air management components should be selected based on the number of air springs, desired response time, vehicle weight, and intended operating characteristics.

This listing includes one air spring only. Brackets, fittings, air lines, shocks, compressors, and other suspension components are sold separately unless specifically identified as included.

Professional Air Suspension Installation

Squid's Rod Shop is an authorized RideTech dealer providing air suspension components, custom fabrication, and professional installation in Hickory, North Carolina.

Our team specializes in custom chassis and suspension systems, air spring mounting, suspension geometry, mounting bracket fabrication, air management installation, and complete restomod builds.

Whether you're replacing an existing AirOverLeaf air spring or developing a custom rear suspension system, we can help determine the appropriate air spring, mounting arrangement, ride height, and supporting components.

For product compatibility assistance or professional installation, contact Squid's Rod Shop.

Pricing Note: Prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.

Details

  • 90007012
  • 90007012
  • RideTech
  • Available to order. Manufacturer lead times may apply.
  • New

Shipping Information

  • Item Requires Shipping
  • Free Shipping!
  • Free ground shipping within the contiguous 48 United States.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.