RideTech 30154000 RidePro Analog 4-Way Air Suspension Control Kit - 3 Gallon
Description
RideTech RidePro Analog 4-Way Air Suspension Control System - 3 Gallon
The RideTech RidePro Analog 4-Way Air Suspension Control System (Part #30154000) provides manual, independent four-corner control for vehicles equipped with compatible air suspension systems. Designed for hot rods, classic cars, custom trucks, and other air suspension applications, this kit combines straightforward analog controls with a 3-gallon aluminum air tank, a single electric compressor, and RideTech's four-way solenoid valve system.
The system allows the driver to raise or lower each corner of the vehicle using four manual rocker switches. Two dual-needle analog pressure gauges provide visual monitoring of the air pressure in all four suspension circuits.
Unlike electronically controlled automatic leveling systems, the RidePro Analog system uses direct manual adjustment and does not require ride-height sensors, a digital display, or programmable ride-height presets.
Features & Specifications
- Manufacturer: RideTech
- Part Number: 30154000
- Product Line: RidePro Analog
- Product Type: Four-way air suspension compressor and control system
- Air Tank: 3-gallon aluminum reservoir
- Compressor: Single Thomas electric air compressor
- Compressor Power: 12V DC
- Air Valve System: RidePro four-way electric solenoid valve block
- Main Air Lines: 1/4-inch DOT-approved air tubing
- Gauge Air Lines: 1/8-inch DOT-approved air tubing
- Controls: Four manual rocker switches
- Pressure Gauges: Two dual-needle analog gauges
- Pressure Switch: Compressor turns on at approximately 135 PSI and off at approximately 150 PSI
- Maximum System Pressure: 150 PSI
- Electrical Components: Wiring harness, relay, fuse holder, and installation hardware
- Suggested Application: Vehicles weighing less than approximately 3,500 pounds
- Automatic Leveling: Not included
- Air Springs: Not included
Included Components
The RideTech 30154000 system includes the primary components needed to control a compatible four-corner air suspension system.
- One Thomas electric air compressor.
- One 3-gallon aluminum air tank.
- One RidePro four-way electric solenoid valve block.
- One RidePro analog control panel with four rocker switches.
- Two dual-needle analog air pressure gauges integrated into the control panel.
- One 135/150 PSI compressor pressure switch.
- Compressor relay, fuse, and wiring components.
- DOT-approved 1/4-inch air tubing for the compressor and air suspension circuits.
- DOT-approved 1/8-inch air tubing for the pressure gauges.
- Push-to-connect air fittings, check valve, and related installation hardware.
Important: The system does not include air springs, air spring mounting brackets, shock absorbers, or other vehicle-specific suspension components. Those items must be selected separately for the vehicle.
Independent Four-Corner Manual Control
The RidePro system provides independent control of four air suspension circuits, allowing the driver to adjust the pressure at each corner of the vehicle.
Four rocker switches operate the electric solenoid valves to inflate or deflate the corresponding air springs.
This manual arrangement allows the driver to adjust vehicle stance and operating ride height without requiring an electronic ride-height control module.
The two dual-needle analog gauges display the pressure in the four air spring circuits. Air pressure is useful for monitoring and adjusting the suspension, although the same pressure does not necessarily produce the same ride height under different vehicle loads.
The system does not automatically level the vehicle or return it to a programmed ride height.
3-Gallon Air Tank & Single Compressor
The standard 30154000 system includes a 3-gallon aluminum air tank and a single Thomas electric compressor.
The compressor is controlled by a pressure switch that activates at approximately 135 PSI and shuts off when the tank reaches approximately 150 PSI.
RideTech recommends this configuration primarily for vehicles weighing less than approximately 3,500 pounds. Heavier vehicles or applications requiring more frequent or faster ride-height adjustments may benefit from a larger air reservoir and dual-compressor system.
Actual suspension response depends on the air spring configuration, vehicle weight, plumbing dimensions, and available reservoir pressure.
Alternative RideTech Compressor Systems
RideTech offers additional air management configurations for customers requiring greater air capacity or higher-flow valves.
- Part #30154000: Standard RidePro Analog four-way system with a 3-gallon tank, single compressor, and 1/4-inch air valves.
- Part #30154100: RidePro Analog four-way system with a 5-gallon tank, dual compressors, and standard 1/4-inch air valves.
- Part #30154700: Big Red Analog four-way system with a 5-gallon tank, dual compressors, and larger 3/8-inch valve and airline configuration.
These are distinct manufacturer part numbers and configurations. They should not be assumed to be interchangeable without confirming the complete component package and pricing.
Customers interested in electronic ride-height presets, automatic leveling, or digital control should consider a compatible current RideTech electronic management system.
Universal Air Suspension Applications
The RidePro Analog control system is designed for use with compatible four-corner air suspension installations rather than one specific vehicle platform.
Potential applications include:
- Traditional hot rods and street rods.
- Classic muscle cars equipped with air suspension.
- Custom pickup trucks and restomods.
- Air suspension conversions using compatible air springs.
- Custom vehicles where independent manual ride-height adjustment is desired.
For heavier vehicles, including many full-size trucks, verify whether the 3-gallon single-compressor system provides adequate air capacity and response time for the application.
Installation & Plumbing Considerations
Proper installation requires securely mounting the air tank, compressor, valve block, and control panel in locations appropriate for the vehicle.
The compressor and electrical components should be protected from excessive road spray, debris, heat, and vibration. Wiring should be properly fused, routed, and secured.
Air lines must be cut squarely and installed into compatible push-to-connect fittings. Route the lines away from sharp edges, exhaust components, moving suspension parts, and other potential sources of damage.
The supplied compressor check valve must be installed according to the manufacturer's instructions to prevent reverse airflow through the compressor supply line.
The air tank should be inspected and drained as needed to address moisture accumulation. All air connections should be leak-tested before operating the vehicle.
Care must also be taken to establish proper suspension travel, air spring clearance, ride height, and mechanical bump stop arrangements.
Professional Air Suspension Installation
Squid's Rod Shop is an authorized RideTech dealer providing air suspension components, custom suspension fabrication, and professional installation in Hickory, North Carolina.
Our team specializes in custom chassis and suspension systems, air spring installation, compressor and air management systems, electrical integration, and complete restomod builds.
Whether you're upgrading a classic car, building a custom truck, or designing a complete air suspension system, we can help select the correct air management components and integrate them with the vehicle's suspension and electrical systems.
For product compatibility assistance or professional installation, contact Squid's Rod Shop.
Pricing Note: Prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.
Details
- 30154000
- 30154000
- RideTech
- Available to order. Manufacturer lead times may apply.
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
- Free ground shipping within the contiguous 48 United States.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!