RideTech 11245010 StreetGrip Suspension Kit - 1968-1972 GM A-Body SBC/LS
Description
RideTech 11245010 StreetGrip Suspension System - 1968-1972 GM A-Body
The RideTech StreetGrip Suspension System (Part #11245010) is a comprehensive front and rear suspension upgrade designed for 1968-1972 General Motors A-body vehicles equipped with small-block Chevrolet or LS-series engines.
Developed to improve handling, ride quality, vehicle stance, and steering response, StreetGrip combines modern suspension technology with the original GM A-body suspension architecture. The system is an excellent choice for classic muscle car restorations, performance street cars, and restomods where improved driving characteristics are desired without converting the vehicle to an entirely different suspension system.
StreetGrip combines vehicle-specific dual-rate coil springs, adjustable RideTech HQ monotube shock absorbers, Delrin control arm bushings, upgraded ball joints, and heavy-duty front and rear sway bars into a coordinated suspension package.
Vehicle Applications
Designed for compatible 1968-1972 GM A-body vehicles, including:
- 1968-1972 Chevrolet Chevelle and Malibu
- 1968-1972 Chevrolet El Camino
- 1970-1972 Chevrolet Monte Carlo
- 1968-1972 Buick Skylark and compatible GS models
- 1968-1972 Oldsmobile Cutlass and compatible 442 models
- 1968-1972 Pontiac GTO and LeMans
- Compatible Pontiac Tempest and other GM A-body applications
Engine Application: This kit is configured for small-block Chevrolet and LS-series engines. RideTech offers a separate big-block configuration (Part #11245110) with appropriately matched front springs.
Application and engine configuration must be verified before ordering. Vehicle modifications, engine swaps, existing suspension components, and control arm bushing styles can affect compatibility.
Features & Specifications
- Manufacturer: RideTech
- Part Number: 11245010
- Product Line: StreetGrip
- Vehicle Fitment: 1968-1972 GM A-body
- Engine Configuration: Small-block Chevrolet / LS
- Suspension Type: Front and rear coil spring system
- Front Springs: Vehicle-specific dual-rate coil springs
- Rear Springs: Vehicle-specific dual-rate coil springs
- Front Shocks: RideTech HQ rebound-adjustable monotube shocks
- Rear Shocks: RideTech HQ rebound-adjustable monotube shocks
- Control Arm Bushings: Low-friction Delrin
- Upper Ball Joints: Taller-than-stock design for improved suspension geometry
- Lower Ball Joints: Replacement lower ball joints included
- Front Sway Bar: Heavy-duty performance sway bar
- Rear Sway Bar: Heavy-duty performance sway bar
- Sway Bar Bushings: Delrin bushings at applicable locations
- Hardware: Installation hardware and instructions included
- Control Arms: Not included; compatible existing control arms are reused
Included Suspension Components
The RideTech 11245010 StreetGrip system includes the major components required to upgrade both the front and rear suspension.
Front Suspension Components:
- Two dual-rate front coil springs matched to small-block/LS applications.
- Two RideTech HQ adjustable monotube front shocks.
- Two tall upper ball joints.
- Two replacement lower ball joints.
- Delrin upper and lower control arm bushing assemblies.
- One heavy-duty front sway bar assembly.
- Associated sway bar bushings, end links, and installation hardware.
Rear Suspension Components:
- Two dual-rate rear coil springs.
- Two RideTech HQ adjustable monotube rear shocks.
- One heavy-duty rear sway bar assembly.
- Associated mounting hardware and installation components.
The kit retains compatible factory-style control arms rather than replacing the complete front suspension with aftermarket tubular control arms.
RideTech HQ Adjustable Monotube Shocks
The StreetGrip system includes RideTech HQ Series monotube shock absorbers designed for the vehicle's suspension geometry.
The shocks provide adjustable rebound damping, allowing the suspension response to be tuned for different driving preferences, road conditions, and vehicle configurations.
Compared with worn original shock absorbers, the HQ shocks can provide improved body-motion control, more consistent damping, and better suspension response.
Dual-Rate Coil Springs
The StreetGrip system incorporates dual-rate front and rear coil springs developed to improve both ride comfort and handling performance.
The spring design provides a more compliant response over smaller road irregularities while increasing support as suspension compression progresses.
The front springs supplied with Part #11245010 are matched to the small-block/LS engine configuration. Vehicles with substantially different engine weight or front-end loading should be evaluated before selecting this kit.
Ride height and final stance depend on vehicle weight, installed equipment, suspension condition, and other application-specific factors.
Improved Suspension Geometry
One of the key features of the StreetGrip system is the inclusion of tall upper ball joints.
The increased ball joint height changes the original suspension geometry to improve camber gain during suspension movement. This can help maintain a more favorable tire contact patch during cornering.
Combined with the upgraded shocks, springs, sway bars, and control arm bushings, the geometry changes contribute to improved handling response and vehicle stability.
Delrin Control Arm Bushings
The StreetGrip system replaces conventional rubber front control arm bushings with low-friction Delrin components.
These bushings reduce unwanted suspension deflection and friction while maintaining more consistent control arm positioning during suspension travel.
Important Fitment Restriction: This StreetGrip kit is designed for lower control arms that use round bushings at both mounting positions.
Some GM A-body vehicles are equipped with oval lower control arm bushings. Vehicles with this configuration require replacement control arms designed for round bushings before the StreetGrip bushing system can be installed.
Inspect the existing lower control arm bushing configuration before ordering. The required replacement control arms are not included with this kit.
Heavy-Duty Front & Rear Sway Bars
The kit includes upgraded front and rear sway bars designed to reduce excessive body roll during cornering.
The sway bars work together with the dual-rate springs and adjustable shocks to provide more controlled suspension movement and a balanced handling response.
Delrin sway bar bushings and associated mounting components help reduce unwanted friction and provide more consistent suspension operation.
Installation & Compatibility Considerations
StreetGrip is designed around the original GM A-body suspension layout, but installation involves substantial suspension disassembly and component replacement.
Typical installation operations include removal of the original front and rear springs and shock absorbers, removal and rebuilding of the front control arms, replacement of ball joints, and installation of the upgraded sway bars.
Proper bushing installation requires supporting the control arms to prevent distortion. Appropriate spring-compression equipment and suspension service procedures must be followed.
Inspect the existing control arms, mounting points, steering linkage, and related suspension components before installation. Worn or damaged components not included in the kit may require replacement.
A professional wheel alignment is required after suspension installation. RideTech provides recommended alignment settings in its installation instructions.
For vehicles equipped with aftermarket brakes, wheels, steering components, modified frames, or other suspension changes, compatibility and clearance should be evaluated before installation.
StreetGrip vs. Air Suspension
RideTech StreetGrip is a conventional coil spring suspension upgrade. It is not an air suspension system and does not include air springs, an air compressor, or electronic ride-height controls.
StreetGrip is particularly suited for customers who want improved suspension performance while retaining a mechanically straightforward coil spring arrangement.
For projects requiring adjustable ride height, RideTech also offers separate air suspension and coilover systems. The appropriate suspension configuration depends on the customer's vehicle, performance goals, and intended use.
Professional Suspension Installation
Squid's Rod Shop offers RideTech suspension components and professional suspension installation at our Hickory, North Carolina facility.
Our team specializes in classic muscle car restoration, custom suspension fabrication, chassis upgrades, steering and brake integration, and complete restomod builds.
Whether you're upgrading a 1968-1972 Chevelle, restoring a classic GTO, or building a modern LS-powered A-body, we can help select and install a properly matched suspension system.
For compatibility assistance, suspension upgrades, or professional installation, contact Squid's Rod Shop.
Pricing Note: All prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.
Details
- 11245010
- 11245010
- RideTech
- Available to order. Manufacturer lead times may apply.
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
- Free ground shipping within the contiguous 48 United States.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!