RideTech 11009501 2-Wheel Universal Air Spring Installer Kit - 224 Style
Description
RideTech 11009501 Universal 2-Wheel Air Spring Installer Kit - 224 Style
The RideTech 11009501 Universal Air Spring Installer Kit provides the primary components needed to fabricate a custom two-wheel air suspension installation. Designed for builders working on vehicles without a dedicated bolt-on RideTech suspension system, this kit includes two F6873 double-convoluted air springs, mounting pattern plates, fabrication tubing, and installation hardware.
The 224-style air springs feature an approximately 8-inch inflated diameter and are suitable for properly engineered custom suspension applications. Unlike vehicle-specific CoolRide kits, the universal installer package requires the installer to design and fabricate the mounting arrangements for the intended vehicle.
Features & Benefits
- Universal Two-Wheel Installation: Provides air springs and fabrication components for a custom two-corner suspension conversion.
- F6873 Double-Convoluted Air Springs: Includes two RideTech 90006873 air springs with an approximately 8-inch inflated diameter.
- Fabrication Mounting Plates: Includes upper and lower pattern plates for adapting the air springs to a custom mounting arrangement.
- 5-Inch Fabrication Tubing: Includes a 23-inch length of tubing for constructing custom air spring mounting brackets.
- Installation Hardware: Includes the specified bolts, nuts, washers, and threaded rods.
- Custom Installation Flexibility: Suitable for experienced builders developing air suspension installations for classic cars, trucks, and hot rods.
Kit Contents
- (2) RideTech 90006873 F6873 double-convoluted air springs
- (2) RideTech 90000027 pattern plates with centered 7/16-inch nuts
- (2) RideTech 90002232 uncoated mounting pattern plates
- (1) RideTech 90001792 23-inch length of 5-inch-diameter fabrication tubing
- Specified mounting bolts, locknuts, washers, threaded rods, and associated installation hardware
Air Spring Specifications
- Air Spring Model: F6873 / 224 Style
- RideTech Air Spring Part Number: 90006873
- Design: Double-convoluted air spring
- Minimum Height: Approximately 3 inches
- Typical Installed Height: Approximately 5 to 5.5 inches
- Maximum Height: Approximately 8 inches
- Inflated Diameter: Approximately 8 inches
Air spring load capacity varies with operating pressure and installed height. Confirm the current RideTech load and dimensional specifications before designing mounting brackets or selecting air springs for a particular vehicle.
Installation Requirements
Important: This is a universal fabrication kit, not a complete vehicle-specific bolt-on suspension system. Installation requires appropriate fabrication, welding, suspension geometry evaluation, and careful verification of component clearances.
Proper air spring positioning must account for suspension travel, steering movement, vehicle weight, shock absorber travel, and the available mounting space. The air spring must not contact surrounding components throughout its operating range.
Appropriate bump stops and suspension travel limits must be incorporated into the final installation. Welding should be performed with the air springs removed to prevent damage from heat and weld spatter.
Additional Components Required
This kit does not include an air compressor, air tank, valves, air management controller, air lines, or shock absorbers. These components must be selected separately to complete a functional air suspension system.
The exact additional components will depend on the vehicle, suspension configuration, and desired operating characteristics.
Product Specifications
Manufacturer: RideTech
Manufacturer Part Number: 11009501
Product Type: Universal Air Spring Installer Kit
Configuration: Two-Wheel
Air Spring Type: 224-Style Double-Convoluted
Application: Universal Custom Fabrication
Professional Installation Available
Squid's Rod Shop is an authorized RideTech dealer specializing in custom suspension installation, chassis fabrication, restoration, and complete restomod builds in Hickory, North Carolina.
Our fabrication team can assist with custom air spring mounting, suspension geometry, chassis modifications, air system plumbing, and complete air suspension integration.
For product questions, component selection, or professional installation inquiries, please contact Squid's Rod Shop.
Details
- 11009501
- 11009501
- 840123500120
- RideTech
- Available to order. Manufacturer lead times may apply.
- New
Categories
Shipping Information
- Item Requires Shipping
- Free Shipping!
- Free ground shipping within the contiguous 48 United States.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!