Additional Images

RideTech 90009002 1500 lb Tapered Rear Air Spring - Medium Height

90009002
RideTech 90009002 Firestone tapered rolling-sleeve rear air spring. 1,500 lb capacity at 100 PSI, 5-inch diameter, 8–8.5-inch ride height, and 1/4-inch NPT air port. External travel stops required.
Availability: Available to order. Manufacturer lead times may apply.
Shipping: Free ground shipping within the contiguous 48 United States.
Pricing: $125.00
Qty:
Free Shipping!

Description

RideTech 90009002 Tapered Rear Air Spring - 1500 lb Medium Height

The RideTech 90009002 is a Firestone 9002 tapered rolling-sleeve air spring designed for custom rear air suspension systems, replacement applications, and compatible RideTech CoolRide suspension installations.

With a load capacity of 1,500 pounds at 100 PSI, a 5-inch inflated diameter, and an intended ride height of 8 to 8.5 inches, this medium-height air spring provides an option for classic cars, hot rods, street rods, and custom vehicles requiring adjustable air suspension support.

The tapered rolling-sleeve design provides a progressive effective spring rate as suspension height and loading change. Proper air spring selection is critical to achieving the desired ride quality, suspension travel, load capacity, and vehicle stance.

Features & Specifications

  • Manufacturer: RideTech
  • RideTech Part Number: 90009002
  • Firestone Air Spring: 9002
  • Product Type: Tapered rolling-sleeve air spring
  • Common Application: Rear air suspension
  • Load Capacity: 1,500 pounds at 100 PSI
  • Minimum Compressed Height: 4.5 inches
  • Recommended Ride Height: 8 to 8.5 inches
  • Published Maximum Extended Height: 11 inches
  • Inflated Diameter: Approximately 5 inches
  • Air Fitting Port: 1/4-inch NPT
  • Construction: Reinforced rubber rolling-sleeve air spring
  • Quantity: One air spring
  • Mounting Hardware: Application-specific mounting components sold separately
  • Air Management System: Not included

Tapered Rolling-Sleeve Design

The Firestone 9002 air spring uses a tapered rolling-sleeve design rather than a conventional double-convoluted air spring configuration.

During suspension movement, the reinforced rubber sleeve rolls along the piston surface. This changes the effective area of the air spring and contributes to its load-support and spring-rate characteristics.

Air pressure can be adjusted to accommodate different loads and ride-height requirements within the limits of the suspension design.

The resulting ride quality depends on the air spring's installed geometry, vehicle weight, suspension motion ratio, shock absorber characteristics, and operating pressure.

Ride Height & Suspension Travel

The 90009002 is commonly specified for applications requiring an operating ride height of approximately 8 to 8.5 inches.

Current distributor specifications identify a minimum compressed height of 4.5 inches and a maximum extended height of 11 inches. These dimensions describe the air spring's operating envelope and should not be interpreted as recommended continuous driving positions.

Important: Confirm the current RideTech specifications and allowable travel for the exact application before establishing suspension bump-stop and extension-stop positions. The air spring must not be allowed to compress or extend beyond its approved operating range.

Suspension travel must be evaluated through the complete range of vehicle motion, including full compression, rebound, and suspension articulation.

Required Compression & Extension Stops

Both an external compression bump stop and an extension stop are required when installing this tapered air spring.

The compression bump stop must prevent the suspension from collapsing the air spring beyond its minimum allowable height.

An appropriately sized shock absorber, limiting strap, or other engineered extension stop must prevent the suspension from extending the air spring beyond its permitted travel.

Operating beyond the allowable compressed or extended dimensions can cause severe air spring damage, loss of suspension support, and damage to surrounding vehicle components.

The air spring itself must not be used as a mechanical suspension travel stop.

Load Capacity & Air Pressure

RideTech lists a load capacity of 1,500 pounds at 100 PSI for this air spring.

The 1,500-pound specification is an individual air spring load rating at a stated pressure, not an automatic vehicle axle rating or recommended operating load for every installation.

Actual load support depends on installed height, air pressure, suspension leverage ratio, and mounting geometry. A vehicle-specific suspension analysis should be completed before selecting an air spring.

Air pressure should be adjusted to achieve the appropriate ride height and suspension support while remaining within the air spring's approved operating limits.

The 100 PSI load-rating reference should not be interpreted as a universal maximum operating pressure or a required pressure for every vehicle.

Vehicle Applications

The 90009002 is a replacement and universal-application air spring used in selected RideTech suspension systems and custom installations.

Potential applications include:

  • Compatible RideTech CoolRide rear suspension systems.
  • Classic cars and muscle cars with custom rear air suspension.
  • Traditional hot rods and street rods.
  • Custom pickup trucks with properly engineered air spring mounts.
  • Replacement of an existing RideTech or Firestone 9002 air spring.
  • Custom suspension fabrication projects requiring a medium-height tapered air spring.

This air spring is not a universal direct-fit replacement for every vehicle. Installation requires compatible upper and lower mounting arrangements, appropriate suspension geometry, and sufficient clearance throughout suspension travel.

Installation & Air System Requirements

Proper installation requires securely mounted upper and lower air spring supports, suitable mounting hardware, a compatible 1/4-inch NPT air fitting, and appropriately routed air lines.

The air spring must remain properly aligned throughout suspension travel. Contact with frame rails, brackets, exhaust components, tires, or other moving parts can cause premature failure.

The suspension must also include appropriately selected shock absorbers and properly positioned compression and extension stops.

An air management system is required to supply and regulate air pressure. Depending on the project, this may include an electric compressor, air reservoir, valves, pressure controls, and electrical components.

This listing is for one air spring only. Mounting brackets, shocks, compressor systems, air lines, fittings, and other suspension components are not included unless separately specified.

Professional Air Suspension Installation

Squid's Rod Shop offers RideTech air suspension components and professional installation at our Hickory, North Carolina facility.

Our team specializes in custom suspension fabrication, air spring mounting, chassis modifications, air management systems, suspension geometry, and complete restomod builds.

Whether you're replacing an existing air spring or designing a new custom suspension system, we can help determine the appropriate spring capacity, mounting configuration, ride height, and suspension travel requirements.

For product compatibility assistance or professional installation, contact Squid's Rod Shop.

Pricing Note: All prices are subject to manufacturer's price changes without notice. If a price change occurs, we will notify you for approval before finalizing your order.

Details

  • 90009002
  • 90009002
  • RideTech
  • Available to order. Manufacturer lead times may apply.
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • Free Shipping!
  • Free ground shipping within the contiguous 48 United States.

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.