This Direct Sheetmetal Replacement 1928-1931 Ford #4 Floorboard.THIS FLOOR IS USED WHEN APPLYING AN AFTER-MARKET CHASSIS - GIVES EXTRA CLEARANCE FOR THE REAR END. The #4 Floorboard is manufactured ...
1928-1931 Ford Transmission Cover- For DSM FirewallsNew
This Direct Sheetmetal Replacement 1928-1931 Ford Transmission Cover for use with DSM Firewalls. The DSM Firewall Type Transmission Cover is manufactured from 16 and 18 gauge cold rolled steel. It ...
Direct Sheetmetal Replacement 1928-1931 Ford Stock Floor Transmission Cover.THIS TRANNY COVER IS USED FOR THE STOCK FLOOR, BUT HAS TALLER CLEARANCE.The Stock Type Transmission Cover is manufactured...
This Direct Sheetmetal Replacement 1928-1931 Ford Under Seat Pan for Sedan/Roadster. MEASUREMENTS: 14.5" FRONT TO REAR; 33" LEFT TO RIGHT ON FRONT EDGE; 36-1/4" LEFT TO RIGHT ON BACK EDGE. The Unde...
Leaky cowl vent? Every one does. We now offer the perfect fix for cowl vents. This filler panel is welded in. It features a slight angle down around the edges so you can weld and then use minimal b...
Leaky cowl vent? Every one does. We now offer the perfect fix for cowl vents. This filler panel is welded in. It features a slight angle down around the edges so you can weld and then use minimal b...
This Direct Sheetmetal replacement firewall kit for a 1937-1942 Willys with a 4" setback. THIS PART FITS PASSENGER CAR AND PICK-UP FOR THE 37-42 WILLYS. The firewall is manufactured from 16 and 18 ...
This Direct Sheetmetal replacement Front Floorboard Section for a 1937-1942 Willys. THIS FLOORBOARD KIT INCLUDES THE TRANNY COVER, TOEBOARDS, AND RIGHT AND LEFT SECTION OF FLOOR. ALSO FITS FOR PICK...
Use this kit for a super clean installation. Direct Sheetmetal kits are made from 16 and 18 gauge, cold-rolled steel, and are all hand-formed in our shop. Each part has been designed so that the av...
1948-1952 Ford Truck Front Floor Kit for DS FirewallNew
Direct Sheetmetal front floor kits are made from 16 and 18 gauge steel. All are hand-formed in their shop right here in the USA! Each part has been designed so that the average hot rod enthusiast w...
1948-1952 Ford Truck Front Floor Kit for STOCK FirewallNew
Direct Sheetmetal front floor kits are made from 16 and 18 gauge steel. All are hand-formed in their shop right here in the USA! Each part has been designed so that the average hot rod enthusiast w...
This stock transmission cover is made taller than stock to accomodate newer transmissions but fits in the stock location. Direct Sheetmetal kits are made from 16 and 18 gauge steel. All are hand-fo...
Leaky cowl vent? Every one does. We now offer the perfect fix for cowl vents. This filler panel is welded in. It features a slight angle down around the edges so you can weld and then use minimal b...
Use this kit for a super clean installation. Direct Sheetmetal kits are made from 16 and 18 gauge, cold-rolled steel, and are all hand-formed in our shop. Each part has been designed so that the av...
1953-1956 Ford F100 Truck Firewall with 4" SetbackNew
Use this kit for a super clean installation. Direct Sheetmetal kits are made from 16 and 18 gauge, cold-rolled steel, and are all hand-formed in our shop. Each part has been designed so that the av...
1953-1956 Ford F100 Truck Front Floorboard For 4" Setback FirewallNew
Use this Direct SheetMetal floorboard kit for the 1953-1956 Ford F100 pick-up truck with a DSM firewall. Replace your rusty floors with this quality constructed floor. They are manufactured from 16...
1953-1956 Ford F100 Truck Front Stock FloorboardNew
Use this Direct SheetMetal floorboard kit for the 1953-1956 Ford F100 pick-up truck with a STOCK firewall. Replace your rusty floors with this quality constructed firewall manufactured from 16 and ...
Use this kit to repair your rusty floor, or use it with the DSM front floor and firewall kits for a super clean installation. It is manufactured from 16 gauge sheet metal.
1953-1956 Ford F100 Truck Stock Transmission CoverNew
This transmission cover will fit your stock floor yet is made taller to accomodate newer transmissions.
All Direct Sheetmetal parts are made from 16 and 18 gauge, cold-rolled steel, and are all ...
Leaky cowl vent? Every one does. We now offer the perfect fix for cowl vents. This filler panel is welded in. It features a slight angle down around the edges so you can weld and then use minimal b...
This Direct Sheetmetal replacement firewall kit for a 1955 to 1959 Chevy pickup truck is made in the USA. It has a 4" setback for the big block Chevy engines. The firewall is straight. The firewall...
Dash Panel Insert Gauges Arch Over Speedo - AluminumNew
This is your chance to create your own gauge cluster. What is the hardest part of installing gauges in your old or custom dash? Buying the hole saws, filling the old holes, and laying out the new g...
